Battery/Charger Upgrade WET (4) 325ah/24v 40amp Onboard Charger
349-050 Battery/Charger Upgrade WET (4) 325ah/24v 40amp Onboard Charger. Instead of the standard (4) 245ah batteries (WET), a set (4) 6-volt / 325ah (WET) batteries and larger onboard charger are provided. This option will net an additional 35% more run time over the standard batteries.
Battery/Charger Upgrade WET (4) 420ah/24v 40amp Onboard Charger
349-051 Battery/Charger Upgrade WET (4) 420ah/24v 40amp Onboard Charger. Instead of the standard (4) 245ah batteries (WET), a set (4) 6-volt / 420ah (WET) batteries and larger onboard charger are provided. This option will net an additional 80% more run time over the standard batteries.
Battery/Charger Upgrade WET (4) 325ah and Universial Charger Cons
349-052
Battery/Charger Upgrade WET (4) 420ah/24v 35amp Console Charger
349-055 Battery/Charger Upgrade WET (4) 420ah/24v 35amp Console Charger. Instead of the standard (4) 245ah batteries (WET), a set (4) 6-volt / 420ah (WET) batteries and larger Off board (shelf mounted console) charger are provided. This option will net an additional 80% more run time over the standard batteries.
Battery Upgrade-AGM (4) 260ah-24/25a charger
349-012 Instead of the standard 12-volt / 185ah battery (WET), a 12-volt / 185ah AGM (Maintenance Free) batteries and special charger is provided. AGM batteries do not typically offer as many cycles (recharges) as properly maintained lead acid, but some scrubber customers prefer their maintenance free nature. They do not require watering and discharge little gas.
Battery Upgrade-AGM (4) 390ah-24v/35a charger
349-015 Instead of the standard 12-volt / 185ah battery (WET), a 12-volt / 390ah AGM (Maintenance Free) batteries and special charger is provided. AGM batteries do not typically offer as many cycles (recharges) as properly maintained lead acid, but some scrubber customers prefer their maintenance free nature. They do not require watering and discharge little gas.
Charger Upgrade-WET 24v/40a Onboard
349-063 Charger On-Board SPE Sealed 24v/25amp WET is designed to mount directly to the auto sweeper and eliminate the need to store a charger remotely. This unit has some protection against water, is programmed for WET batteries and its DC output is 24-volt/40amp.
Charger Upgrade-WET 24v/25a Console
349-085 Charger On-Board SPE Sealed 24v/25amp WET is designed to mount directly to the auto sweeper and eliminate the need to store a charger remotely. This unit has some protection against water, is programmed for WET batteries and its DC output is 24-volt/25amp.
Charger Upgrade-WET 24v/35a Console
349-087 Charger On-Board SPE Sealed 24v/25amp WET is designed to mount directly to the auto sweeper and eliminate the need to store a charger remotely. This unit has some protection against water, is programmed for WET batteries and its DC output is 24-volt/35amp.
Plastic Battery Cover TR Series
349-036 Plastic Battery Cover is a simple sheet of plastic that covers the tops of the batteries, offering a 2nd layer of protection for the battery posts. This walk behind scrubber comes standard with individual rubber booties for each battery post, but some customers prefer a supplemental sheet that covers the entire battery, cell caps and all.
Single Point Watering System
349-038 Single Point Water System for batteries allows easy battery watering, by connecting all of the battery cells via special caps. These caps connect to a single tube for watering of the scrubberФs batteries, and help to equalize the electrolyte levels.
Non-Marking Tires - Full Set - Grey Rubber
349-192 Grey Non-marking tires are in place of the standard black rubber tires. This allows customers to operate on sensitive floors like ceramic tile, glossy epoxy or waxed surfaces with lower risks of potential black marks. WARNING: Grey tires are more susceptible to harsh industrial chemicals, and so are only recommended for use in "commercial" applications. Therefore, they come with a limited warranty.
Non-Marking Front Tire Grey Rubber
349-188 Grey Non-marking tires are in place of the standard black rubber tires. This allows customers to operate on sensitive floors like ceramic tile, glossy epoxy or waxed surfaces with lower risks of potential black marks. WARNING: Grey tires are more susceptible to harsh industrial chemicals, and so are only recommended for use in "commercial" applications. Therefore, they come with a limited warranty.
Non-Marking Rear Tires Grey Rubber
349-190 Grey Non-marking tires are in place of the standard black rubber tires. This allows customers to operate on sensitive floors like ceramic tile, glossy epoxy or waxed surfaces with lower risks of potential black marks. WARNING: Grey tires are more susceptible to harsh industrial chemicals, and so are only recommended for use in "commercial" applications. Therefore, they come with a limited warranty.
12" Heavy Duty FWD Upgrade
349-525 Available as an upgrade over the standard 1.0 hp (10" diameter) front wheel drive. The larger motor is better able to climb steep ramps and the larger diameter tire will operate better over rough floors.
E-Stop Switch
349-285 E-STOP is a RED kill switch on the dash board, that when depressed cuts off the key switch circuit, disabling all systems on the scrubber. It is intended for use during a panic, when the operator may struggle to locate or operate the key switch.
LED Headlight Upgrade
349-300 LED Headlight Upgrade is a swap out option equipping the scrubber with LED headlight, in place of the standard ones. These LED units offer reduced energy consumption and are significantly brighter. Especially helpful in Сlow lightЧ applications like remote areas of a warehouse or operating in semi trailers, freezers, etc...
Seat with Switch
349-335 Seat with Switch equips the standard seat with a Сcut-offЧ switch. This switch disables the key switch circuit on the scrubber if the operator is not properly seated.
Strobe Light
349-340 Strobe Light ? Amber is a flashing light mounted to the top/rear of the scrubberФs recovery tank. The strobe light increases the floor scrubberФs visibility to other vehicles or people, and is recommended in congested facilities.
Hood Safety Switch
349-345
Dual Point Charging Pedestal & On Board
349-356 In addition to the standard onboard charger, these machines will be equipped with a secondary Red 50 Anderson charging port in the steering column. This permits the machine to be charged with an appropriately sized (24 volt) charger for the batteries installed.
Side Broom Guards
349-435 Side Broom Guards are steel bumpers mounted to the scrubberФs frame, and designed to offer enhanced protection to the side broom if so equipped. The bumpers stick out a few inches on either side, and so will increase the scrubberФs "minimum distance to complete a U-Turn".
HD Side Doors & Side Broom Guards
349-513 HD side doors are heavy gage, powder painted steel doors, which hinge open to access the scrub deck. These HD doors mount with a stainless hinge, to the rider sweeperФs steel frame. Side Broom Guards are steel bumpers mounted to the scrubberФs frame, and designed to offer enhanced protection to the side broom if so equipped.
Hopper Split Boxes - Set of 3
349-410 These smaller boxes are removable and designed to be easily emptied into a smaller garbage can. They allow the operator to handle lighter loads and transfer the debris into more remote disposal areas.
CE Package w/Battery Disconnect
349-609
Overhead Guard - HD Package Required (#349-513)
349-617 2 Posts equips the rider with a solid guard. Ideal for applications with high racking or anywhere thereФs a risk of falling objects or debris.
)window.location='http://factorycat.ru/scrubber/comparison_pics/tr/raisedfloorfc.jpg')
Raised Operator Floor Plate
349-626 Raised Operator Floor Plate XR Series brings the foot pedal and foot rest up approximately 3Ч higher. Developed initially to allow a single scrubber platform to be sold globally, where we encounter a wide range of operator heights.
Seat Belt
349-629 Seat Belt equips the rider scrubberФs standard seat with a simple seat belt.
Retractable Seat Belt with Switch
349-632 Seat Belt with Retractable belts and Cut-Off switch equips the rider scrubber with a СretractingЧ set of belts that include a cut off switch for the floor scrubber's key switch circuit. With this option, the battery scrubber will not function until the operator is properly seated, with the latch engaged.
Artificial Turf Grooming Package
349-641
Operator Side Platform, for accessories
349-648 Ideal for holding a 2 gallon pump sprayer. This small platform is easily installed or removed without tools.
2" Hitch Receiver, Hitch Ball not included
349-649
Trash Receptacle Platform - Fits Std. 55 Roughneck Can
349-650 Designed to hold a large garbage can at the rear of the machine, allowing the operator to collect trash from other bins, or collect objects too large to run the TR over (2x4s, banding, shrink wrap).
Vacuum and Blow Option
349-652 We have set up a pair of vaccum motors to allow the oWe have set up a pair of vacuum motors to allow the operator to vacuum in the hard to reach areas, and the blow option to get all the debris out of surface cracks.
Custom Controller Programming
349-659 Custom Programming gives the company buying the scrubber the ability to more ideally select the parameters and characteristics of the scrubber. Our scrubbers have over 100 parameters programmed into the controller, which control variables like acceleration rate, reverse speed, vacuum timers, low battery lock-outs, etc.
Aluminum Hopper Upgrade
349-664 Aluminum Hopper for Cylindrical decks is a 50% lighter weight part and replaces the standard powder painted steel hopper. The aluminum part is less likely to develop rust over time, but requires more care when empting into steel trash bins as it could dent.
Battery/Charger Upgrade-WET (4) 420ah-24v/40a 220v Onboard
349-053 Instead of the standard 12-volt / 185ah battery (WET), a 12-volt / 185ah AGM (Maintenance Free) batteries and special charger is provided. AGM batteries do not typically offer as many cycles (recharges) as properly maintained lead acid, but some scrubber customers prefer their maintenance free nature. They do not require watering and discharge little gas.
Battery/Charger Upgrade-WET (4) 420ah-24/40a 220v Console
349-057 Replaces the standard "onboard" charger, with a Сshelf mounted / portableЧ. It is designed for alternative (220 volt) AC current, with 40 amps output and a charge profile intended for WET batteries. Suitable for the upgraded 420ah batteries.
Charger Upgrade-WET
Replaces the standard СonboardЧ charger, with one designed for alternative (220 volt) AC current, with output and a charge profile intended for WET batteries.
Export Crating, Stud Frame w/ Cardboard outer Covering
349-100 Export Crating includes a number of extra steps for transit across oceans. Some of these steps are based on shipping requirements (like treated lumber in the pallet), and others are our own steps to reduce salt corrosion, etc. The packaging includes special sheets that the battery scrubber is parked on top of, and then shrinks wrapping to seal from the environment. Special dry packs to absorb moisture are installed in the central command (electrical) boxes and under the floor sweeper.
Battery Disconnect
349-354 Battery Disconnect gives the scrubber operator the ability to disconnect the battery pack leads between the batteries and the controller. Then an external charger can be plugged in for recharging the batteries. It also comes in handy for servicing the battery scrubber, as disconnecting the batteries is recommended before conducting any auto-sweeper repairs.
Charge Inhibit Switch
349-355 Charge Inhibit Switch automatically disables the traction system on the scrubber, anytime the recharge plug is engaged. Intended to keep operators from attempting to drive the floor scrubber away with the charger still plugged in.
CE Package
349-608 CE Sticker indicates that this scrubber complies with the standards and requirements of the CE.
Export Crating Package TR Series
349-99 Export Crating includes a number of extra steps for transit across oceans. Some of these steps are based on shipping requirements (like treated lumber in the pallet), and others are our own steps to reduce salt corrosion, etc. The packaging includes special sheets that the battery scrubber is parked on top of, and then shrinks wrapping to seal from the environment. Special dry packs to absorb moisture are installed in the central command (electrical) boxes and under the floor sweeper.
Delete Batteries (4) Include Std. Box and Cables
349-810 Delete the Standard (Qty 4) 12-volt Batteries allows the customer to get a credit back for buying the scrubber without any batteries. The delete credit is less $$ than it will cost to supply batteries locally, and for domestic shipments we prefer to have OEM batteries used. There is a wide variety of battery sizes, terminal posts, and not the least of which? quality. We use the highest quality batteries available. Another reason for the small credit is that all scrubbers are tested for 15 minutes, so the delete option requires extra steps after QC to remove the batteries.
Delete Charger (24v/25a) On-Board
349-813 Delete Charger allows the customer to get a credit back for buying the scrubber without a charger. The delete credit is less $$ than it will cost to source a charger locally, and for domestic shipments we prefer to have OEM charger used. There is a wide variety of AC/DC specifications, capacities, and not the least of which? quality. We use the highest quality chargers available, as they reduce our warranty risk on the batteries.
