Äëÿ òîãî, ÷òîáû óâåëè÷èòü ôîòî è óâèäåòü äîïîëíèòåëüíûå ôîòîãðàôèè ïðîñòî êëèêíèòå ïî íåìó.
Frame, Battery & Charger Upgrade Options ? Lead Acid (WET)
HD Frame is an option that includes a new heavy duty and taller frame, to accommodate the larger (Qty: 4) 420ah Trojan batteries and 24volt/36amp charger. This option raises the tank up approximately 3—, but the Central Command box and handlebars are lowered slightly to maintain a satisfactory position. This larger battery pack will extend the standard Magnum”s run time by 80% over the standard 245ah batteries.
(Qty: 4) 6-volt / 325ah WET batteries w/charger
253-017 Instead of the standard 245ah batteries (WET), a set (Qty: 4) 6-volt / 325ah WET batteries and an upgraded 36 amp charger is provided. These batteries offer approximately 35% more run time than the standard 245ah batteries.
(Qty: 4) 6-volt / 360ah WET batteries w/charger
253-015 Instead of the standard 245ah batteries (WET), a set (Qty: 4) 6-volt / 360ah WET batteries and an upgraded 36 amp charger is provided. These batteries offer approximately 45% more run time than the standard 245ah batteries.
Battery & Charger Options - Maintenance Free (AGM)
(Qty: 4) 6-volt WET batteries
Instead of the standard 245ah batteries (WET), a set (Qty: 4) 6-volt WET batteries is provided. This option does not include the recommended 24v/36amp charger upgrade. These batteries offer approximately 35% more run time than the standard 245ah batteries.
Charger Console, Dual Pro Universal Voltage AGM (24v/25amp)
253-078 Charger Console, Dual Pro Universal Voltage AGM (24v/25amp) is a charger programmed to work on our AGM batteries, which can uniquely work on any markets AC current (Volts or Hz). Frequently supplied on scrubbers going overseas, its DC output is 24-volt/25 amps.
Charger Console, Dual Pro Universal Voltage WET (24v/25amp)
253-079 Charger Console, Dual Pro Universal Voltage WET (24v/25amp) is a charger programmed to work on our WET batteries, which can uniquely work on any markets AC current (Volts or Hz). Frequently supplied on floor scrubbers going overseas, its DC output is 24-volt/25amps.
Console Charger-Lester 220v 50hz - WET 24v/25a
253-080
Charger On-Board SPE Sealed 24v/25amp AGM
Charger On-Board SPE Sealed 24v/25amp AGM/WET is designed to mount directly to the battery scrubber and eliminate the need to store a charger remotely. This unit has some protection against water, and its DC output is 24-volt/25amp.
Plastic Battery Cover
253-036 Plastic Battery Cover is a simple sheet of plastic that covers the tops of the batteries, offering a 2nd layer of protection for the battery posts. This walk behind scrubber comes standard with individual rubber booties for each battery post, but some customers prefer a supplemental sheet that covers the entire battery, cell caps and all.
Single Point Water System for batteries
Single Point Water System for batteries allows easy battery watering, by connecting all of the battery cells via special caps. These caps connect to a single tube for watering of the scrubber”s batteries, and help to equalize the electrolyte levels.
Chemical Free, Oscillating, Strip/Scrub Disk System
253-141 Chemical Free, Oscillating, Strip/Scrub Disk System uses the oscillation of the brush driver, special sanding pads, enhanced scrub motor hp, rpm and pressure to allow the floor scrubber to clean floors or strip wax without using harsh chemicals. The option includes a ‘mode— switch allowing the operator to switch back to traditional settings, making it uniquely able to move from strip mode, back to scrub mode.
ECON- Energy Saver Switch
253-290 ECON- Energy Saver Switch allows the scrubber operator to choose between standard performance range (maximum) or ‘reduced— performance range and thus conserve energy and extend the runtime. Intended to be one of many environmentally conservative measures we”re taking to reduce energy use.
Recycling System
253-607
Spray Jet option
253-127 Spray Jet option equips the scrubber with a heavy duty hose 4” - 10” and spray nozzle. This allows the operator to use the scrubber”s clean solution under pressure (3.0 gpm / 45 psi) to flush out the recovery tank when draining the tank when fresh water source is not within reach. Operator can also cleanout the scrub deck/hopper, pre-spray a large floor area for better detergent dwell time, cleaning under racks, around equipment, into restrooms and more.
Vacuum Wand
253-129 Vacuum Wand extends the reach of the scrubber”s vacuum system. The option includes a steel wand and vacuum shoe, and a 12” flexible hose to connect to the recovery tank. It permits the operator to recover spills under racking, behind cabinets or cleaning restroom floors.
Spray Jet / Vac Wand Combo
253-131 Spray Jet / Vac Wand Combo equip the scrubber with both of the previously described options.
On-Board Soap System (SUDS)
253-138 On-Board Soap System (SUDS). This Super-concentrated Universal Dispensing System automatically and precisely meters the soap into the solution stream, thus avoiding spills, misuse of chemicals, unauthorized dilution adjustments, etc. By blending the scrubber soap at the end of the solution stream, only fresh water is used to fill the tank, or run through the solution system”s filter and solenoid valve, reducing potential clogs with these items. The SUDS jugs include cap inserts with valves to protect operators from exposure, a big safety feature of traditional drums and pales of soap. The system allows the operator to run with it OFF, Normal or Double Dose. The option includes a case of (6) ½ gallon jugs of PowerCat detergent to get the customer started.
Power Dose Holder
253-142 Power Dose Holder is a small tray on the scrubber, which accommodates our 1 Quart bottles of Pre-treat and the Rental/Demo bottles. The Pre-Treat does an excellent job of removing tire marks and recovering heavy soil areas. The Rental/Demo quarts contain the concentrated SUDS product in a manually portioned manner, with only 4 to 8 oz required before filling up the tank. Eliminating the need to use larger jugs or pales to pour (spill) detergent into the scrubber”s solution tank.
Shrouds for Magnum 26— Disk
253-152 Shrouds for Magnum 26— Disk is an option which swaps out the standard HD Jaws for the lower hanging shrouds, which clean better under overhangs. Still constructed of thick steel and incorporating non-marking wall rollers, these shrouds are popular in grocery stores and other ‘commercial— or retail applications. They mount directly to the scrub deck and remove easily for access to the scrub brushes or pads.
Shrouds for Magnum 30— Disk
253-156 Shrouds for Magnum 30— Disk is an option which swaps out the standard HD Jaws for the lower hanging shrouds, which clean better under overhangs. Still constructed of thick steel and incorporating non-marking wall rollers, these shrouds are popular in grocery stores and other ‘commercial— or retail applications. They mount directly to the scrub deck and remove easily for access to the scrub brushes or pads.
Shrouds for Magnum 34— Disk
253-158 Shrouds for Magnum 34— Disk is an option which swaps out the standard HD Jaws for the lower hanging shrouds, which clean better under overhangs. Still constructed of thick steel and incorporating non-marking wall rollers, these shrouds are popular in grocery stores and other ‘commercial— or retail applications. They mount directly to the scrub deck and remove easily for access to the scrub brushes or pads.
Tires ? Pneumatic (Air) Grey Non-marking tires
253-177 Tires ? Pneumatic (Air) Grey Non-marking tires are in place of the standard black rubber pneumatic (air filled) tires. This allows customers to maintain the good traction characteristics of a soft air tire, but without the potential black marks. WARNING: Grey tires are more susceptible to harsh industrial chemicals, and so are only recommended for use in ‘commercial— applications. Therefore, they come with a limited warranty.
Tires ? Foam Filled Black tires
253-172 Tires ? Foam Filled Black tires are the standard pneumatic (air filled) tires, but injected with a liquid material which sets up into a foam form. This allows customers to maintain the good traction characteristics of a soft air tire, but without the potential flats from nail punctures. WARNING: Foam filled tires can develop flat spots if left idle for weeks at a time (shipment), and can damage the rims over time. Therefore, they come with a limited warranty.
Tires ? Foam Filled Grey tires
253-174 Tires ? Foam Filled Grey tires are the standard pneumatic (air filled) tires, but injected with a liquid material which sets up into a foam form. This allows customers to maintain the good traction characteristics of a soft air tire, but without the potential flats from nail punctures. WARNING: Grey tires are more susceptible to harsh industrial chemicals, and so are only recommended for use in ‘commercial— applications. Foam filled tires can develop flat spots if left idle for weeks at a time (shipment), and can damage the rims over time. Therefore, they come with a limited warranty.
Tires ? Solid Drive 12—
253-184 Tires ? Solid Drive 12— diameter are used to replace the scrubber”s standard pneumatic tires, eliminating any potential for flats, while avoiding the problems that are inherit with ‘foam filling—. Extra caution should be taken to avoid sitting idle in cold applications, which will cause flat spots. These tires are made with a special rubber material to offer good traction on a wet floor surface.
Tires ? Soft Grey Casters
253-182 Tires ? Soft Grey Casters are non-marking ‘cushion— style wheels, often found on scrubbers used on ceramic tiles. They replace the standard polyurethane caster wheels, which are also non-marking but made with a harder material. The soft material rides more quietly and smoothly across rough surfaces and puts lower load on sensitive tile edges. The softer material does increase the effort required to steer by perhaps 15%, and are more susceptible to harsh chemicals and stripper.
Parking Brake
253-202 Parking Brake is a manually engaged ‘over-center— lever, allowing the automatic floor scrubber”s operator to lock the left drive tire in place. We still recommend that owners avoid parking the scrubber on ramps or inclines.
Managers” Lock-Out Brush Pressure
253-305 Managers” Lock-Out Brush Pressure allows a Manager, with a private key, to lock out the scrubber”s Scrub pressure adjustment. Our scrubbers offer 5 down pressure settings, and should only be used on maximum settings for floors with heavy soil build up or stripping floor finish. To avoid unnecessary wear on brushes or brushes, this lockout can be employed to maintain Managements” preferred settings.
Manager”s Lock-Out Solution
253-310 Manager”s Lock-Out Solution Control permits a Manager, with a private key, to lock out the scrubber”s Solution Flow adjustment. Our floor scrubbers offer 6 settings for solution flow (Off, 0.2 gpm, 0.4 gpm, 0.6 gpm, 0.8 gpm, 1.0 gpm), with Heavy flow only needed for thick soil, dusty applications or times when cleaning at a higher transport speed. To limit the waste of water, the solution setting can be locked.
E-STOP
253-285E-STOP is a RED kill switch on the dash board, that when depressed cuts off the key switch circuit, disabling all systems on the scrubber. It is intended for use during a panic, when the operator may struggle to locate or operate the key switch.
MAGNUM Chassis Hour Meter
253-270 MAGNUM Chassis Hour Meter has a battery backup, and is independent of the standard gauge on the scrubber. It is designed as a fail-safe for tracking hours. The traction units LCD has 4 hour meters (key, transport, scrub, vacuum), but could potentially fail, and thus reset the meters to zero. Like a car”s odometer, the hour meter is the best indication of a scrubber”s use and age.
Recharge Counter
253-320 Recharge Counter is a meter on our scrubbers that tracks the number of times the recharge plug has been engaged to the battery charge point. The quantity of recharge cycles, along with proper maintenance, determines the battery”s life expectancy. High quality lead acid batteries can be expected to offer 500 to 650 cycles before requiring replacement, so managing this value offers customers the ability to maximize their return on their battery investment and foresee battery replacement.
Auto Squeegee Lift
253-260 Auto Squeegee Lift is an electric (500 lb capacity) actuator, and replaces the squeegee lift cable. This system reduces the work required by the operator to raise/lower the scrubber”s squeegee, and automatically picks it up when the floor scrubber travels in reverse, protecting the squeegee blades from potential damage.
Toggle switch substitute for standard Key Switch
253-296 Toggle switch substitute for standard Key Switch is for customers who prefer the simplicity and reliability of a toggle switch. It eliminates the potential problems with lost keys, but also the ability for management to control usage.
Rental Package Central Command
253-330 This is a central command built with old fashioned (1990's) technology. A simple Curtis speed controller and all other systems running on switches, relays and circuit breakers. It's designed for use in markets that prefer reliability and ease of service over all of the automation we have with our standard system.
Dash Mount Solution Shut-Off
253-352 Dash Mount Solution Shut-Off gives the scrubber operator the ability to shut off the solution flow with a single switch, instead of cycling down with the toggle +/-. It includes a 2nd valve on the scrub deck and so also reduces the potential for water leakage during storage.
Vacuum, Electric Shut Off
253-350 Vacuum, Electric Shut Off ? with horn is a system standard on most of our riders. When the foam protection system (screen with ping pong ball) engages and shuts off airflow, which causes the vacuum (lift) to climb at the vacuum motor. Our vacuum switch triggers and beeps a horn. This helps the operator avoid driving the scrubber with a clogged squeegee hose or full recovery tank.
Side Broom System
253-427 Side Broom System ? For 27— Cylindrical Magnums only equips the front of the battery scrubber with dual side brooms, which allow for unique edge cleaning under racking and against walls. Each motor is individually powered by a motor, and the entire system can be pivoted up and turned off when not in use. Large rollers in the front corners are standard.
Concrete Polishing (Disk Only)
Concrete Polishing Package is an option that equips our scrubber to also be useful when polishing concrete floors. Depending on the condition of the concrete, customers can use the scrubber to develop a high gloss finish, without wax or any other ‘coatings—. The option includes:
Brass Brush Driver/Idler Upgrade (Cylindrical)
253-507 Brass Brush Driver/Idler Upgrade (Cylindrical) is for applications that require unusually harsh detergents or where a auto scrubber will encounter corrosive chemicals on the floor. This upgrade replaces the standard aluminum drivers/idlers with brass.
Metal Recovery Lid Upgrade
253-519 Metal Recovery Lid Upgrade replaces the standard ‘smoked— plastic recovery tank visual inspection lid, with a powder painted steel cover. While being more durable, it eliminates the scrubber operators” ability to monitor foam in the recovery tank and potential ingestion by the vacuum motor.
Scrub Motor Upgrade 1.0 hp (Cylindrical)
253-523 Scrub Motor Upgrade 1.0 hp (Cylindrical). Some applications benefit from an increase in scrubbing power, rpm, down pressure or all of the above. These motors can generate and sustain 35% more power, allowing heavy soil, tire marks or stripping to be completed in less time.
Scrub Motor Upgrade 1.0 hp (Disk)
253-524 Scrub Motor Upgrade 1.0 hp (Disk). Some applications benefit from an increase in scrubbing power, rpm, down pressure or all of the above. These motors can generate and sustain 35% more power, allowing heavy soil, tire marks or stripping to be completed in less time.
Stainless Steel Scrub Deck
253-556 Stainless Steel Scrub Deck is 304-grade stainless, and best suited for applications where the floor scrubber is subjected to highly corrosive materials. It replaces the standard powder painted steel deck.
Stainless Steel Tank Baffle
253-560 Stainless Steel Tank Baffle is a 304 grade stainless sheet, and best suited for applications where the recovery tank is subjected to highly corrosive materials. It replaces the standard powder painted steel baffle.
Squeegee length in lieu of standard size (linatex)
Different squeegee size lieu of standard size (linatex) allows the scrubber owner to go with a different squeegee than what is standard. While our standard squeegee size is designed to balance water control on turns and maneuverability through congested areas, some accounts prefer a substitute size to better meet their needs.
Squeegee blade material change Linatex to Gum
Squeegee blade material change Linatex to Gum permits the scrubber owner to go with another squeegee blade material other than our standard Linatex, which is known for its exceptional wear. Some applications have rough or grouted floors, so the softer GUM material can offer superior drying as it better seals over the irregularities. For applications with oil, hydraulic fluid, fuels or citrus cleaners, the URETHANE can offer better resistance to the harsh chemicals when often swell the GUM or LINATEX material.
Squeegee blade material change Linatex to Urethane
Squeegee blade material change Linatex to Urethane permits the scrubber owner to go with another squeegee blade material other than our standard Linatex, which is known for its exceptional wear. Some applications have rough or grouted floors, so the softer GUM material can offer superior drying as it better seals over the irregularities. For applications with oil, hydraulic fluid, fuels or citrus cleaners, the URETHANE can offer better resistance to the harsh chemicals when often swell the GUM or LINATEX material.
Urethane Cylindrical Wiper in lieu of Linatex
253-947 Urethane Cylindrical Wiper in lieu of Linatex For applications with oil, hydraulic fluid, fuels or citrus cleaners, the URETHANE can offer better resistance to the harsh chemicals when often swell the GUM or LINATEX material.
Aluminum Scrub Deck 26" - 34" Disk Deck only
253-556
CE Package, Battery Disconnect inludes E-Stop
253-609
Freezer Package, Magnum
253-646 Includes special coatings and a small heater to help the machine operate more reliably in coolers and freezers. They work to reduce condensation and also resist any that does form. The electronics also operate better in warmth.
Custom Programming
253-659 Custom Programming gives the company buying the scrubber the ability to more ideally select the parameters and characteristics of the scrubber. Our scrubbers have over 100 parameters programmed into the controller, which control variables like acceleration rate, reverse speed, vacuum timers, low battery lock-outs, etc.
Oversized Drain Saver
253-667 Oversized Drain Saver is similar to the stainless screen, which is standard in our battery powered floor scrubbers, but with 2x the capacity for applications with large amounts of small debris on the floor.
)window.location='http://www.tomcatequip.com/scrubber/optionspics/magnum/solutionshutoff.jpg')
Solution Filter Shut-off Valve
253-668 Solution Filter Shut-off Valve allows the scrubber operator to close a simple valve going to the solution filter. This allows for the floor scrubber”s solution filter to be removed and cleaned without having to drain the solution tank first.
Aluminum Hopper for Cylindrical
Aluminum Hopper for Cylindrical machines is a 50% lighter weight part and replaces the standard powder painted steel hopper. The aluminum part is less likely to develop rust over time, but requires more care when empting into steel trash bins as it could dent.
Interchange Decks (No Brushes)
HD Frame Upgrade Only No Batteries & Charger
253-006
Charger, Console 200v/50 Hz AC Japan Only
253-007 Charger, Console 200v/50 Hz AC Japan Only is a charger programmed to work on our WET batteries, but developed to work on a specific AC current (200Volts/ 50Hz).
Battery Upgrade (4) 6v/245ah with (220v Charger)
253-043 Battery Upgrade (4) 6v/245ah with (220v Charger) supplies the standard scrubber and batteries with a special AC charger for certain foreign markets.
Export Crating Stud Frame w/ Cardboard Outer Covering
253-100 Export Crating includes a number of extra steps for transit across oceans. Some of these steps are based on shipping requirements (like treated lumber in the pallet), and others are our own steps to reduce salt corrosion, etc. The packaging includes special sheets that the auto scrubber is parked on top of, and then shrinks wrapping to seal from the environment. Special dry packs to absorb moisture are installed in the central command (electrical) boxes and under the scrubber.
Battery Disconnect
253-354 Battery Disconnect gives the scrubber operator the ability to disconnect the battery pack leads between the batteries and the controller. Then an external charger can be plugged in for recharging the batteries. It also comes in handy for servicing the battery scrubber, as disconnecting the batteries is recommended before conducting any scrubber repairs.
Charge Inhibit Switch
253-355 Charge Inhibit Switch automatically disables the traction system on the floor scrubber, anytime the recharge plug is engaged. Intended to keep operators from attempting to drive the floor scrubber away with the charger still plugged in.
CE Sticker
253-608 CE Sticker indicates that this battery scrubber complies with the standards and requirements of the CE.
Export Crating
253-99 Export Crating includes a number of extra steps for transit across oceans. Some of these steps are based on shipping requirements (like treated lumber in the pallet), and others are our own steps to reduce salt corrosion, etc. The packaging includes special sheets that the auto scrubber is parked on top of, and then shrinks wrapping to seal from the environment. Special dry packs to absorb moisture are installed in the central command (electrical) boxes and under the scrubber.
Delete Batteries
253-810 Delete the Standard (Qty 4) 6-volt / 245ah Batteries allows the customer to get a credit back for buying the scrubber without any batteries. The delete credit is less $$ than it will cost to supply batteries locally, and for domestic shipments we prefer to have OEM batteries used. There is a wide variety of battery sizes, terminal posts, and not the least of which? quality. We use the highest quality batteries available. Another reason for the small credit is that all scrubbers are tested for 15 minutes, so the delete option requires extra steps after QC to remove the batteries.
Delete Charger
253-820 Delete Charger (24v/25amp) allows the customer to get a credit back for buying the scrubber without a charger. The delete credit is less $$ than it will cost to source a charger locally, and for domestic shipments we prefer to have OEM charger used. There is a wide variety of AC/DC specifications, capacities, and not the least of which? quality. We use the highest quality chargers available, as they reduce our warranty risk on the batteries.
